Permatex Synthetic Brake Parts Lubricant
In stock
Size
Shipping: AB/SK/MB $30 · ON/QC $40 · NT $50 — base rate free over $150. BC or Atlantic Canada? Ask us for a shipping quote.
Pickup in Edmonton — free. Taxes and shipping calculated at checkout.
100% genuine
100% genuine Permatex, from authorized North American distribution.
A green, non-melting synthetic brake lubricant for caliper pins, sleeves, bushings, hardware and the backs of brake pads, previously sold as Permatex Ultra Disc Brake Caliper Lube. The non-silicone, non-petroleum formula is made to keep caliper parts lubricated throughout pad life and helps prevent seizing and squeal. Keep it off pad friction surfaces and rotors.
Permatex’s Ultra Disc Brake Caliper Lubricant is an environmentally-friendly, green, non-melting, synthetic lubricant. This Ultra Disc Brake Caliper Lubricant is formulated to lubricate under the most adverse brake conditions, assuring that critical caliper pins, sleeves, bushings and pistons remain lubricated throughout pad life.
- green, non-melting, environmentally-friendly, 100% synthetic lubricant
- Formulated to lubricate under the most adverse brake conditions, preventing seizing and sticking of disc brake components
- Assures that critical metal-to-metal contact areas remain lubricated throughout the pad life
- Prevents disc brake squealing
- Non-silicone, non-petroleum based formula
- Prevents long bolt and sleeve seizing and galling
- Reduces Noisy Braking by 25%
- Long Lasting Performance for Passenger Vehicles
Warnings
- DO NOT APPLY TO BRAKING SURFACE OF CALIPER PADS.
- Note: Keep lubricant off pads and rotors.
- This product is not recommended for use in pure oxygen and/or oxygen rich systems.
- WARNING: MAY CAUSE EYE AND SKIN IRRITATION.
- May be harmful if swallowed.
- California Proposition 65: WARNING Cancer. www.P65Warnings.ca.gov
Specifications & Approvals
Chemical Type: Synthetic grease, Appearance: Green viscous grease, Specific Gravity: 0.90, Worked penetration (60 strokes), ASTM D-217: 265 - 295, Dropping point, °C (°F) ASTM D-2265: None, Corrosion Preventative Test ASTM D-1743: Pass, Timken OK Load, lbs., ASTM D-2509: 35, Four-Ball Wear Scar, mm (40 kg. 1 hr. 1200 rpm) ASTM D-2266: 0.67, Water Washout @ 100 °F, % ASTM D-1264: 1.7, Pour point, °F, ASTM D-97: -45, Flash Point, ASTM D-92, COC, °F: 425, Temperature Range: -40°F to 400°F (-40° to 204°C)
Recommended for vehicles requiring
Caliper pins, Hardware, Back-side of brake pads, Long and short bolts, Sleeves, Bushings, Outboard pad backing plate, Inboard pad backing plate, Disc brake calipers, Pistons