Permatex 5 Minute Epoxy Gel
Special order — we bring it in, then call you with timing.
Size
Shipping: AB/SK/MB $30 · ON/QC $40 · NT $50 — base rate free over $150. BC or Atlantic Canada? Ask us for a shipping quote.
Pickup in Edmonton — free. Taxes and shipping calculated at checkout.
100% genuine
100% genuine Permatex, from authorized North American distribution.
A two-part, general-purpose epoxy gel in a 1:1 dual syringe. The resin carries a blue dye that disappears once resin and hardener are fully mixed, so you can see when it is ready to apply. It sets in 5 minutes, dries clear without clamping and reaches usable strength in four hours at 22°C (72°F); it will not bond most polyethylene or polypropylene plastics.
Permatex's General Purpose 5 Minute Gel Epoxy provides the flexibility to reposition before the setting time. The fast setting, two-part adhesive and filler system is specially formulated with a Blue Dye Indicator that disappears when it's fully mixed and ready to use. The advanced gel formulation reduces mess and waste compared to traditional epoxies; unique indicator system takes the guesswork out of "ready to use".
- General purpose epoxy with non-drip gel formula for mess free application
- Blue dye indicator disappears when epoxy is ready to apply
- Permanent strength up to 3400 PSI strength
- Dries clear and no clamping required
- Water resistant, non-shrinking formula
- Fills gaps
- Impact resistant
Warnings
- NOTE: Adhesive will not bond most polyethylene or polypropylene plastics.
- This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as an adhesive for chlorine or other strong oxidizing materials.
- SDS (resin 84101R): Warning. Causes skin irritation. Causes serious eye irritation. May cause an allergic skin reaction.
- Wear protective gloves, protective clothing, eye protection and face protection.
- Work area must be protected from accidental spills.
- California Proposition 65: WARNING Cancer. www.P65Warnings.ca.gov
Specifications & Approvals
Temperature range -60F to +180F (-51C to 82C), Permanent strength up to 3400 PSI strength, Mix ratio (volume) 1:1, 84101 Working Time: 4 – 5 minutes, 84101 Fixture Time: 8 – 10 minutes, Usable strength is reached in four hours at 72°F (22°C). Cooler temperatures may require longer set time, NOTE: Epoxy sets in 5 minutes and may be handled in 15 minutes, Final color Clear to slightly yellow, Appearance: Resin Blue Gel; Hardener Clear to Yellow Gel, Chemical Type Epoxy and Mercaptan/Amine Resins, Specific Gravity 1.10 - 1.17, Flash Point, TCC >200°F
Recommended for vehicles requiring
Complex, multi-piece assemblies, Ceramic, Chrome, Fabric, Fiberglass, Glass, Hard plastic (excluding polyethylene and polypropylene), Metal, Rubber
Treat rate
Mix ratio (volume) 1:1. Depress plunger evenly to dispense equal amounts of resin and hardener; thoroughly mix on a clean discardable surface until blue dye indicator disappears and epoxy is a uniform color.