Liqui Moly Pro-Line Engine Flush
In stock
Size
Shipping: AB/SK/MB $30 · ON/QC $40 · NT $50 — base rate free over $150. BC or Atlantic Canada? Ask us for a shipping quote.
Pickup in Edmonton — free. Taxes and shipping calculated at checkout.
Authorized stockist
We're an authorized Liqui Moly stockist.
A pre-oil-change engine flush for 4-stroke gasoline and diesel engines, with or without turbochargers. One 500 mL can treats 3 to 5 L of warm engine oil; let the engine idle 10 to 15 minutes, then change the oil and filter. It is safe with catalytic converters and particulate filters but is not for motorcycles.
A highly effective formulation designed for quick and safe removal of deposits in engines before an oil change. Optimizes oil consumption, guarantees proper oil pressure in hydraulically activated systems and ensures proper oil flow after a cold start. Allows the fresh oil to immediately develop full performance while restoring full engine performance and reducing exhaust emissions.
- highly economical
- suitable for diesel particulate filters
- does not attack common sealing materials
- tested for turbochargers and catalytic converters
- gentle cleaning
- simple to use
- rapid cleaning
Warnings
- Not suitable for use on motorbikes.
- WARNING: This product can expose you to chemicals including naphthalene, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
- DANGER: POISON
- SDS (OSHA HCS 2024 / WHMIS 2015 rev 2022) signal word: Danger. H227 - Combustible liquid. H304 - May be fatal if swallowed and enters airways. H317 - May cause an allergic skin reaction. H319 - Causes serious eye irritation.
- SDS: P331 - Do NOT induce vomiting. P301+P310 - If swallowed: Immediately call a POISON CENTER, a doctor.
Specifications & Approvals
Color / appearance: yellow, brown, Base: additive, carrier liquid, Flash point: 145 °F DIN ISO 2592, Pour point: -49 °F DIN ISO 3016, Form: liquid, Viscosity at 104 °F: <7 mm²/s, Odor: characteristic
Recommended for vehicles requiring
For all 4-stroke gasoline and diesel engines, with or without turbochargers. Safe for use with catalytic converters and particulate filters (GPF/DPF). Compatible with most commercially available motor oils and in oil running belt.
Treat rate
One full can (500 ml) used with 3–5 Liters (3.2 to 5.3 U.S. Qts) of motor oil. Add Pro-Line Engine Flush to the engine oil at operating temperature before changing the oil. After adding the product allow the engine to idle for 10 to 15 minutes depending on the degree of contamination. Then change the oil and the filter.