Liqui Moly Pro-Line Diesel Particulate Filter Purge
In stock
Size
Shipping: AB/SK/MB $30 · ON/QC $40 · NT $50 — base rate free over $150. BC or Atlantic Canada? Ask us for a shipping quote.
Pickup in Edmonton — free. Taxes and shipping calculated at checkout.
Authorized stockist
We're an authorized Liqui Moly stockist.
The second step of Liqui Moly's two-step Pro-Line service for cleaning a soot-clogged diesel particulate filter on the vehicle, without removing it. It must be used after Pro-Line Diesel Particulate Filter Cleaner (part 20110), applied with Liqui Moly's DPF pressurized tank spray gun (7946) and probe set (7945), and the job is finished with a scan-tool regeneration. For professional repair shop use only.
A highly effective fluid used for cleaning soot clogged DPF units without disassembly. Dissolves contaminants inside DPF units, restores vehicle performance and fuel consumption. Regular use help prevent expensive repairs. Always use in combination with Pro-Line Diesel Particulate Filter Cleaner (part no. 20110). To apply use DPF Pressurized Tank Spray Gun (part no.7946), DPF-Probe with 5 interchangeable tips (part no. 7945) and if needed DPF Spray Probe long (part no. 20630).
- optimal engine performance
- reduces operating costs
- dissolves soot
Warnings
- Always use in combination with Pro-Line Diesel Particulate Filter Cleaner (part no. 20110). To apply use DPF Pressurized Tank Spray Gun (part no.7946), DPF-Probe with 5 interchangeable tips (part no. 7945) and if needed DPF Spray Probe long (part no. 20630).
- For professional repair shop use only.
- Not a fuel additive. Professional use only.
- Observe: Before cleaning make sure DPF temperature is below 40 °C (104 °F).
- Particle filter location need to be determined as some vehicles have their DPF located near exhaust manifolds or next to a turbocharger. In such a case utmost care must be taken to prevent fluid from entering the combustion chamber and cause damage.
- To complete DPF cleaning, a suitable scan tool or diagnostic software is required for final DPF regeneration in accordance with the current manufacturer's specifications.
Specifications & Approvals
Base: flushing, carrier liquid, Color / appearance: blue, clear, pH value: 7, Density at 59 °F: 1 g/cm³, Form: liquid, Odor: odourless
Recommended for vehicles requiring
For cleaning of diesel particle filter (DPF) as installed on vehicle. For professional repair shop use only.
Treat rate
Add full bottle of Pro-Line Cleaner (20110) into spray gun (7946). Set pressure to 6-8 bar (90-120 psi) and spray short bursts of approximately 5-10 seconds towards core of unit while aiming up-down / side-to-side. After completion wait 10-15 minutes, then spray full bottle of Pro-Line Purge (20112), using the same technique.