Liqui Moly LM 508 Anti-Seize Compound
Special order — we bring it in, then call you with timing.
Size
Shipping: AB/SK/MB $30 · ON/QC $40 · NT $50 — base rate free over $150. BC or Atlantic Canada? Ask us for a shipping quote.
Pickup in Edmonton — free. Taxes and shipping calculated at checkout.
Authorized stockist
We're an authorized Liqui Moly stockist.
A copper-coloured anti-seize and release compound for threaded connections and parting surfaces exposed to high temperature, high pressure and corrosion, such as exhaust systems, turbines and spark plug threads. Liqui Moly rates it up to +2012 °F (+1100 °C). Apply a suitable amount to clean surfaces with a brush or lint-free cloth.
A release agent, specifically designed for high temperature applications on threaded connections and parting surfaces which are exposed to high temperatures, high pressures and corrosive effects in turbines, compressor equipment, exhaust systems, spark plug threads etc.
- universal application
- outstanding thermal resistance
- resistant to acceleration forces
- outstandingly adherent
- resistant to hot water, salt water and splash water
- vibration damping effect
- long-term corrosion protection
- lubricant and release effect
Warnings
- WARNING: This product can expose you to chemicals including crystalline silica, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
- SDS (WHMIS 2023) signal word: Danger. H300 Fatal if swallowed. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H340 May cause genetic defects. H373 May cause damage to organs through prolonged or repeated exposure. H410 Very toxic to aquatic life with long lasting effects.
- SDS: P202 Do not handle until all safety precautions have been read and understood. P280 Wear protective gloves, protective clothing, eye protection and face protection. P273 Avoid release to the environment.
Specifications & Approvals
Brief description: KF2T-20 DIN 51502, Operating temperature range: -4 - +2012 °F, NLGI number: 2 DIN 51818, Thickener: Bentonite, Worked penetration: 265-295 1/10 mm DIN ISO 2137, Color / appearance: coppery, Dropping point: none DIN ISO 2176, Oil separation after 7 days at 104 °F: 3,1 % DIN 51817, Oil separation after 18 hours at 104 °F: 1,1 % DIN 51817, Behavior in the presence of water: 1-90 DIN 51807 part 1, Base oil: mineral oil, Viscosity at 104 °F: 490 mm²/s ASTM D 7042-04, Flash point: 428 °F DIN ISO 2592, Pour point: -11 °F DIN ISO 3016
Recommended for vehicles requiring
For high temperature applications on threaded connections and parting surfaces which are exposed to high temperatures, high pressures and corrosive effects in turbines, compressor equipment, exhaust systems, spark plug threads etc.
Treat rate
Apply to cleaned surfaces using a paint brush, brush or lint-free cloth. Apply the amount which is appropriate for the application.