K Tool Q-Bond Adhesive Kit
Special order — we bring it in, then call you with timing.
Size
Shipping: AB/SK/MB $30 · ON/QC $40 · NT $50 — base rate free over $150. BC or Atlantic Canada? Ask us for a shipping quote.
Pickup in Edmonton — free. Taxes and shipping calculated at checkout.
100% genuine
100% genuine K Tool, from authorized North American distribution.
A Q-Bond repair kit with two 10 mL bottles of cyanoacrylate adhesive plus black and grey reinforcing powders. Use the adhesive alone on metal, plastic, rubber and ceramic, or build it up with the powders to fill and rebuild broken tabs, clips, casings and fairings. With the powders it is rated from -55°C to 180°C, the adhesive alone from -55°C to 82°C, and it does not stick to polypropylene, polyethylene or stainless steel.
Q-Bond small repair kit is an ultra-strong adhesive. It comes in a kit with four components: two identical adhesives, one grey and one black reinforcing powder. Inside the kit is an instruction manual in multiple languages and two red pins to pierce the seal of the adhesives. This repair kit has a high variety of applications, but is generally used to repair rubber, plastic and metal.
- Ultra-strong adhesive and reinforcing powders
- Repairs almost anything!
- Rock solid in 10 seconds!
- Q-Bond repairs are able to be grinded, filed, sanded and even painted!
- Includes 2 Q-BOND adhesive; 1 black reinforcing powder; 1 grey reinforcing powder
Warnings
- CYANOACRYLATE. DANGER. BONDS SKIN AND EYES IN SECONDS. KEEP OUT OF REACH OF CHILDREN. CAUSES SKIN IRRITATION. CAUSES SERIOUS EYE IRRITATION. MAY CAUSE RESPIRATORY IRRITATION. AVOID BREATHING VAPOURS. IF IN EYES: RINSE CAUTIOUSLY WITH WATER FOR SEVERAL MINUTES. REMOVE CONTACT LENSES, IF PRESENT AND EASY TO DO. CONTINUE RINSING.
- Q-Bond does not stick to Polypropylene (PP); Polyethylene (PE) and Stainless Steel.
- The adhesive on its own may varies with regards to curing time on the different hard surfaces. For instances on ABS plastic it may cure in seconds, but on metal it may take up to 30 min.
- AVOID CONTACT WITH SKIN & EYES. AVOID BREATHING VAPOR. BONDS ON CONTACT. SHOULD FINGERS STICK TOGETHER, APPLY A SOLVENT SUCH AS ACETONE TO CONTACT AREAS THEN WASH OFF WITH WATER. DO NOT USE SOLVENTS NEAR EYES OR OPEN WOUNDS. IN CASE OF EYE CONTACT IMMEDIATELY FLUSH WITH WATER.
- OPEN AND SEAL WITH A PIN. DO NOT CUT BOTTLE OPEN.
- Storage: Keep in a cool dry place. Keep out of direct sunlight. After opening the adhesive, store it by wiping off all excess glue from the nozzle and insert the red pin that is provided. Store in upright position.
Specifications & Approvals
Adhesive: Chemical Type Ethyl Cyanoacrylate; Chemical Nature Liquid; Colour Clear & Transparent; Viscosity (CPS) 2-3; Odour Sharp, irritating; Flash point >82°C; Specific Gravity 1.05; Shelf Live 12 Months, Black Powder / Grey Powder: The product consists of metal oxide pigments and salts; Dry powder mixture; Colour Black / Light Grey; Specific Gravity 3.4; Shelf Live Not known to expire, Average curing time: 10 seconds, Gap Fill (mm): Adhesive Only 0.04; Black powder & Adhesive Designed for filling; Grey Powder & Adhesive Designed for filling, Tensile-Shear Strength (kgf/cm2): Adhesive Only 120 ~ 200; with powders Still to be tested, Pressure Limit (Bar): Adhesive Only Still to be tested; Black powder & Adhesive 90; Grey Powder & Adhesive 90, Temperature Range (°C): Adhesive Only -55 ~ 82; Black powder & Adhesive -55 ~ 180; Grey Powder & Adhesive -55 ~ 180, Resistance to Water, Oil, Diesel, Petrol: Adhesive Only Still to be tested; with powders Yes to all, Grey powder: Petrol / Oil Resistant
Recommended for vehicles requiring
Adhesive Only: Metal, Plastic, Rubber and Ceramic, Black Powder and Adhesive: Hard Plastics, Remote Controls Lugs/Clips, Tabs, Motorcycle Fairings, Bumpers, Radiators and many more, Grey Powder and Adhesive: Metal Surfaces, Motorcycle Casings, Carburettors, Aluminium, Office Equipment and many more