ATE SL.6 DOT 4 Brake Fluid
In stock
Size
Shipping: AB/SK/MB $30 · ON/QC $40 · NT $50 — base rate free over $150. BC or Atlantic Canada? Ask us for a shipping quote.
Pickup in Edmonton — free. Taxes and shipping calculated at checkout.
100% genuine
100% genuine ATE, from authorized North American distribution.
A low-viscosity DOT 4 brake fluid for brake and clutch systems, suited to vehicles with electronically controlled braking such as ESP, ABS and ASR. It meets ISO 4925 Class 6, FMVSS No. 116 DOT 4 and SAE J1704, with a maximum viscosity of 700 mm²/s at -40 °C.
Thanks to its low viscosity at extremely low temperatures, this brake fluid for hydraulic motor vehicle brake and clutch systems is particularly well suited for brake systems with electronically controlled hydraulic components where rapid modulation of the brake pressure at the braked wheel is required, especially in systems designed to prevent the vehicle from oversteering or understeering, i.e. the electronic stability program (ESP*). At a maximum of 700 mm²/s, viscosity at -40° C is only about half as high as the corresponding values of many other commercially available DOT 4 fluids and hence meets the requirements of ISO specification 4925 for brake fluids with very low-temperature viscosity (class 6).
- Low viscosity even at low temperatures, ideal for ESP, ABS and ASR
- Particularly well suited for brake systems with electronically controlled hydraulic components where rapid modulation of the brake pressure at the braked wheel is required
- Boiling point: Minimum 265 °C (509 °F)
- Wet boiling point: Minimum 175 °C (347 °F)
- Viscosity at -40 °C: Maximum 700 mm²/s, only about half as high as many other commercially available DOT 4 fluids; viscosity at +100 °C: 1.7 to 2.3 mm²/s
- Characteristics: Homogeneous, clear; Colour: Yellow; Water content: Maximum 0.20 %
- Shelf life at storage temperatures ranging between -20 °C and 40 °C: up to 5 years in the original sealed containers
- For motor vehicle brake and clutch systems
Warnings
- ATTENTION: May damage fertility. May damage the unborn child.
- Signal word: Warning. H361 Suspected of damaging fertility or the unborn child.
- P201 Obtain special instructions before use. P202 Do not handle until all safety precautions have been read and understood. P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection. P308+P313 IF exposed or concerned: Get medical advice/attention. P405 Store locked up.
- Brake fluid must be changed at regular intervals. The change intervals prescribed by the vehicle manufacturer must be observed. The vehicle manufacturer's instructions regarding brake fluid specifications must be observed.
- Can be mixed with other brake fluids that meet the ISO 4925 Class 6, DOT 5.1 or DOT 4 specifications. However, optimum ESP functionality even at very low temperatures is best ensured with fluids meeting the ISO 4925, Class 6 specification.
Specifications & Approvals
FMVSS No. 116 – DOT 4, SAE J1704, ISO 4925, Class 6