ATE SL DOT 4 Brake Fluid
In stock
Size
Shipping: AB/SK/MB $30 · ON/QC $40 · NT $50 — base rate free over $150. BC or Atlantic Canada? Ask us for a shipping quote.
Pickup in Edmonton — free. Taxes and shipping calculated at checkout.
100% genuine
100% genuine ATE, from authorized North American distribution.
A glycol-ether DOT 4 brake fluid for hydraulic brake and clutch systems in motor vehicles. It meets FMVSS No. 116 DOT 4, SAE J1704 and ISO 4925 Class 4, with a minimum dry boiling point of 260 °C and a minimum wet boiling point of 165 °C.
ATE DOT 4 SL brake fluid is a long-proven hydraulic fluid for motor vehicle hydraulic brake and clutch systems. It consists of a mixture of polyethylene glycol ethers, polyethylene glycols and boric acid esters of polyethylene glycol ethers with corrosion and ageing protection additives as well as further additives. ATE DOT 4 SL brake fluid meets and exceeds requirements of brake fluid standards such as FMVSS No. 116 – DOT 4, SAE J1704 and ISO 4925, Class 4.
- A proven DOT 4 brake fluid for a wide range of applications
- Boiling point: Minimum 260 °C (500 °F)
- Wet boiling point: Minimum 165 °C (329 °F)
- Viscosity at -40 °C: Maximum 1,400 mm²/s; viscosity at +100 °C: 2.0 to 2.6 mm²/s
- Characteristics: Homogeneous, clear; Colour: Yellow; Water content: Maximum 0.20 %
- Shelf life at storage temperatures ranging between -20 °C and 40 °C: up to 5 years in the original sealed containers
- Protection from corrosion by high-grade additives
- For motor vehicle hydraulic brake and clutch systems
Warnings
- ATTENTION: May damage fertility. May damage the unborn child.
- Signal word: Warning. H361 Suspected of damaging fertility or the unborn child.
- P201 Obtain special instructions before use. P202 Do not handle until all safety precautions have been read and understood. P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection. P308+P313 IF exposed or concerned: Get medical advice/attention. P405 Store locked up.
- Brake fluid must be changed at regular intervals. The change intervals prescribed by the vehicle manufacturer must be observed. The vehicle manufacturer's instructions regarding brake fluid specifications must be observed.
- Always follow manufacturer's instructions when using brake fluid.
Specifications & Approvals
FMVSS No. 116 – DOT 4, SAE J1704, ISO 4925, Class 4